OPERATIONS » History » Version 7

« Previous - Version 7/23 (diff) - Next » - Current version
Владимир Ипатов, 10/24/2012 07:24 PM


SCI cluster virtualization and HA capabilities are really bringed
by a Ganety installation over the Debia/GNU Linux, so you should
read Ganeti manuals on how to operate with virtualisation and HA

The main documentation page:
A brief operations overview:

Ganeti operations should be issued on the 'master' node which has additional the
cluster's IP as an interface alias.
The first new nodes becames the 'master candidates', so they can be promoted to master
if the master node will fail.

Basic cluster management
Failover management
SCI services management

Major commands:

Check if all is ok

gnt-cluster verify

Show detailed information

gnt-(cluster|node|instance) info

List objects


gnt-node list

Configured instances

gnt-instance list

Create new instance

New instance on the NODE1 with failover on the NODE2, with one disk size 10Gb and 256M RAM.
INSTANCE_NAME must be resolvable via DNS.

gnt-instance add -t drbd -o debootstrap+default -s 10g -B memory=256m -n NODE1:NODE2 INSTANCE_NAME

Real example: create new instance
  • on the node gnt2
  • with failover on gnt1
  • with three disks:
    • 10g on volume group xenvg
    • 600m on volume group xenvg (probably for swap)
  • 5g on volume group xenvg
  • DNS name vg-test1
  • IP address will be configured automatically by resolving vg-test1' IP and matching it against /etc/ganeti/networks
gnt-instance add -t drbd -o debootstrap+default --disk 0:size=10g,vg=xenvg --disk 1:size=600m,vg=xenvg --disk 2:size=5g,vg=newvg -B memory=256m -n gnt2:gnt1 vg-test1

NOTE: the vg=.... option to specify different volume groups will be available since Ganeti 2.4.0 release.

Instance manipulations

Various simple instance manipulations

gnt-instance (startup|shutdown|reboot|failover|remove|console) INSTANCE

OS command execution

Run OS command on all nodes

gnt-cluster command .....


All new instances, including 'sci' are going with empty root password and no ssh server installed.
You should first log in to the instance using gnt-instance console INSTANCE command, then set
root's password using passwd command and install ssh server using

apt-get install openssh-server