Проект

Общее

Профиль

INSTALL » История » Версия 20

« Предыдущее - Версия 20/45 (Разница(diff)) - Следующее » - Текущая версия
Dmitry Chernyak, 24.02.2013 18:56


INSTALL

OVERVIEW | BUILD-ISO | INSTALL | SETUP | OPERATIONS | GITMAGIC | LICENSE | STATUS
ОБЗОР | СБОРКА-ISO | УСТАНОВКА | НАСТРОЙКА | ОПЕРАЦИИ | МАГИЯ GIT | ЛИЦЕНЗИЯ | СОСТОЯНИЕ

Get the ISO image

You can get the latest built ISO image here: http://sci-dev.skycover.ru/dist/SCI-CD-latest.iso
The older versions also are in the http://sci-dev.skycover.ru/dist/
Otherwise you can build your own ISO-image (for experienced users): BUILD-ISO

Burn ISO image

You burn it with your favorite tool (for ex. - k3b).

Create bootable USB flash

We wrote script for this:
You must have usb flash with first vfat partition that able to fit installer iso image.
start the script from root:

./makeusb.sh /dev/sdX

where /dev/sdX - path to block device pointing to your usb flash(whole flash, not a partition with vfat - not /dev/sdX1).
After execution of script vfat from flash will be mounted on /mnt (it may be changed in script). You must put ISO image in root directory of this filesystem and correctly umount it.
Now you can start installer from your flash drive.

Minimal System Requirements

In real case you must choose hardware in according to real objectives.
For testing purposes minimal system requierements is:
  • 1GB RAM
  • 50GB HDD
  • 1Gbit ethernet for DRBD link(if nodes are more than 1)
  • Hardware Virtualization support(if you want to use HVM mode)

Install the system

Install the system on two nodes (you may use only one node, but high
availability capabilities will be unavailable).

You must to know following data at this time:
  • The number and mask of local network
  • The IP addresses of two installed nodes (in the same network)
  • The internet router's address (in the same network, if any)
  • The cluster's domain name
  • The hostnames for new nodes
  • The address of the future DNS server(NOT an existent host!), which will be installed on the
    cluster service instance.
  • The root's password
  • The idea on how to create storage system - to use MD or hardware raid
    or no raid at all(not recommended) - on your own choice.

Network topology configuration is complicated question, it described here: SETUP

Partitioning

You should preserve following partitions on your nodes:
Name Size Purpose
/ 10G Root partition for all node's data
swap 1G Swap space for Dom0 in calculation of 512Mb RAM
xenvg the rest The LVM Volume, named 'xenvg', without any partitions

The VG "xenvg" will be used as the default place for the instance's volumes.
Also the "system-stuff" volume will be automatically created on xenvg (and mounted as /stuff).
It serves for various big stuff like cdrom images, instance backups etc.

If you want to place your own partitions on xenvg, you should then exclude them from ganeti-managed volumes. (SEE SETUP).
Simplest way is to name your partitions "sytem-*" because this pattern is excluded in SCI-CD by default.

You may create more partitions or volume groups at your choice.

DNS server's address

The cluster has it's own DNS server, which is also the 'approx' and
'puppet' server. At the SETUP stage, cluster DNS server can be linked
to other DNS servers in the forwarding mode.

The server's address must not be the address of the existing service.

The cluster's domain name must not be the name of the existing domain if
local domain already exists (use subdomain, or completely different name).

Automatic post-installation changes

During the installation phase, the postinst.sh script from the distro
made the following system tuning: POST-INSTALL

The cluster is ready to setup

The CD installation takes about 15 minutes per node.
Read SETUP next.

diskpart.png (83,4 КБ) Владимир Ипатов, 03.03.2018 18:56

diskpart_yes.png (66,6 КБ) Владимир Ипатов, 03.03.2018 18:56

dnssci.png (63 КБ) Владимир Ипатов, 03.03.2018 18:56

donainsci.png (54,7 КБ) Владимир Ипатов, 03.03.2018 18:56

hostname_1.png (56,9 КБ) Владимир Ипатов, 03.03.2018 18:56

gateway.png (71,3 КБ) Владимир Ипатов, 03.03.2018 18:56

install_coplete.png (48,6 КБ) Владимир Ипатов, 03.03.2018 18:56

install.png (141 КБ) Владимир Ипатов, 03.03.2018 18:56

ip_1node.png (63,1 КБ) Владимир Ипатов, 03.03.2018 18:56

netmask.png (48,5 КБ) Владимир Ипатов, 03.03.2018 18:56

root_pass.png (109 КБ) Владимир Ипатов, 03.03.2018 18:56

boot_hdd.png (109 КБ) Владимир Ипатов, 03.03.2018 18:57

domain_sci.png (7,27 КБ) Евгений Антонов, 05.03.2018 14:36